SLIDE ‘n RIDE Vehicle Assist Transfer Seat/Board/Device 500lb. Rated-Adjustable, Safe, Compact – Very Important: Please Measure Your Vehicle Before Purchasing – (See Measure Guide)
Available at Amazon
$699.99
Price: $699.99
(as of Jun 07, 2025 13:15:47 UTC – Details)
Product Description
Need help getting someone in & out of a vehicle?
Better than a transfer board more cost effective than a transfer seat!
The Slide ‘n Ride transfer seat is a safer and easier way to enter and exit a vehicle. It’s a simple four-step process:
1. Open the legs.
2. Position the legs inside the vehicle and on the pavement.
3. Have the passenger sit on the seat.
4. Slide them into the car, it’s really that easy!
Order your Slide ‘n Ride TODAY!
* IMPORTANT: Due to the constant changes with vehicle models it is critical to refer to the measurement guide to ensure compatibility and fit with your vehicle before ordering.
How to Measure!
Measurement Guide
Immediately outside the car with the door open, measure the distance from the ground to the top of the car seat at the midpoint between the front of the seat and the back. The Slide ‘n Ride long legs (outside the car) extend from 18-1/2” to a maximum of 26-1/2” in 1” increments.
Secondly, inside the car, measure the distance from the floor of the car to the same top (midpoint) of the car seats edge. The short legs (inside the car) extend 7” to a maximum of 9” adjustable in 1” increments.
Lastly, to assure that you have enough door swing clearance please do the following, cut a 17”x17“ template out of cardboard. Hold the template against the door frame and the edge of the car seat. Measure the distance from the edge of the template to the edge of the car door trim while the door is in its widest open position. You will need a minimum clearance of 7” in order to slide off the top of the Slide ‘n Ride and into the car. ** This is a major concern so please be sure to evaluate the width of the door swing opening with the cardboard template to assure your door will open wide enough allowing leg swing into and out of the vehicle.
Technical Specifications
Product Dimensions : 19″ x 17″ x 4″ Weight: 14 lbs. Load Rating: 500 lbs. Vehicle Compatibility: MUST Measure according to Measurement Guide before purchasing!
Set-up and Installation
Unlock legs from seat
Press the release tab to unlock legs from seat.
Unfold and lock legs in open position
Unfold exterior long legs and unfold interior short legs and listen for a ‘click’ to indicate that legs are locked in place.
Install and set interior leg length
Place short legs over and behind the passenger door sill so that they touch the floor inside the vehicle. Adjust length of short legs with spring loaded tabs. Release tabs and listen for a ‘click’ to indicate that legs are locked in place.
Set exterior leg length and level
The long legs should sit on ground outside of vehicle. If the seat is NOT level, press the tabs on the long legs to adjust seat to a level position. When seat is level, release tabs and listen for a ‘click’ to indicate that seat is locked in place.
Assisting Passenger into a Vehicle.
Once passenger approaches vehicle, the Caregiver should instruct or assist them to turn 180 degrees, step backward until the seat touches their legs.
The caregiver should instruct or assist passenger to sit on top of Slide ‘n Ride.
The caregiver should instruct or assist passenger to lift one leg, then other and place inside car while turning 90 degrees into vehicle. Instruct or assist passenger to use hands assisting themselves off Slide ‘n Ride and onto the vehicle’s seat.
The caregiver should instruct or assist passenger to buckle seat belt.
Is Discontinued By Manufacturer : No
Product Dimensions : 19 x 17 x 4 inches; 14 Pounds
Date First Available : August 1, 2018
Manufacturer : Group Endeavor, LLC
ASIN : B07G3K9JTN
PLEASE MEASURE YOUR VEHICLE BEFORE PURCHASING OUR PRODUCT because our product DOES NOT fit all vehicles. Reference our Slide ‘n Ride Measurement Guide. Compatible with many sedans and a some LOWER height SUV’s, Vans, and Trucks.
A transfer seat that is safer and more stable than a transfer board. Use your upper body strength or caregiver assistance to shuffle from our product into and out of a vehicle. Weighs (14 lbs.), folds, and easily stores behind the seat or in the trunk. 500lb. Rated. Once setup this is a fixed platform to get situated on outside of the vehicle and there are NO movable parts.
Helps caregivers safely assist passengers while entering and exiting a vehicle. The Slide ‘n Ride sets up to a FIXED position and needs to be at the SAME height as the Vehicle’s seat (PLEASE MEASURE your vehicle). Seat DOES NOT SWIVEL and there is no back support where assistance may be needed. Smaller stature people may still need a step or assistance getting onto and off the Slide ‘n Ride. May not work for people in long leg braces.
Durable engineering with stainless steel components and patented latching system. Each leg is independently adjustable in 1″ increments. Overall MAX height from the ground to the top of the Vehicle seat is 26-1/2″. Height range inside the vehicle is 7″ to 9″ MAX from the top of the Vehicle seat to the floor board.
Health & Flexible Savings Account eligible and saves on the cost of medical transportation. PLEASE Measure your vehicle according to the measurement guide BEFORE you buy! Does NOT fit every vehicle.
Customers say
Customers find the transfer seat performs well and is sturdy, with one mentioning it works specifically with the Hyundai Ioniq. They appreciate its ease of use, with one customer noting it’s a game-changer for their wheelchair-bound spouse, and consider it safe and helpful for mobility, with one mentioning it can be easily transferred between vehicles. While some customers find it affordable, others consider it expensive, and customers disagree on whether it fits most cars, with several noting it’s slightly too short for their vehicles.
Related Products
$699.99